From 9051da0184cf839037f1370c729b27bf065b9c95 Mon Sep 17 00:00:00 2001
From: tao_z <tzj0429@163.com>
Date: Sat, 10 Jul 2021 22:06:34 +0800
Subject: [PATCH] 马达可以转动
---
USR/SRC/Motor.c | 162 +++++++++++++++++++++++++++++++-----------------------
1 files changed, 93 insertions(+), 69 deletions(-)
diff --git a/USR/SRC/Motor.c b/USR/SRC/Motor.c
index 514feb8..6e431fb 100644
--- a/USR/SRC/Motor.c
+++ b/USR/SRC/Motor.c
@@ -8,7 +8,8 @@
#include "SEGGER_RTT_Conf.h"
#include "SEGGER_RTT.h"
static volatile motor_rotate_t motor_drive = {0};
-static uint32_t motor_pluse = 0;
+static uint32_t motor_pluse = 1500;
+static volatile uint8_t motor_step = 0;
static void motor_phasechange(void);
static void update_speed_dir(uint8_t dir_in);
@@ -17,6 +18,7 @@
motor_drive.timeout = 0;
motor_drive.speed = 0;
motor_drive.enable_flag = 0;
+ motor_pluse = 2000;
memset(motor_drive.speed_group, 0, SPEED_FILTER_NUM);
hall_enable();
@@ -61,19 +63,19 @@
/* ��ȡ���������� U ��״̬ */
if (Get_HallSensorA_State())
{
- state |= 0x01U << 0;
+ state |= (0x01U << 0);
}
/* ��ȡ���������� V ��״̬ */
if (Get_HallSensorB_State())
{
- state |= 0x01U << 1;
+ state |= (0x01U << 1);
}
/* ��ȡ���������� W ��״̬ */
if (Get_HallSensorC_State())
{
- state |= 0x01U << 2;
+ state |= (0x01U << 2);
}
return state; // ���ش�����״̬
@@ -206,16 +208,17 @@
void HAL_HallExti_TriggerCallback(void)
{
uint8_t step = 0;
- step = get_hall_state();
- /* ��ȡ��������������״̬,��Ϊ��������� */
+ motor_step = get_hall_state();
+ // /* ��ȡ��������������״̬,��Ϊ��������� */
if (exti_interrupt_flag_get(HALL_A_EXTI | HALL_B_EXTI | HALL_C_EXTI)) // �ж��Ƿ��ɴ����жϲ���
{
- // update_motor_speed(step, __HAL_TIM_GET_COMPARE(htim, TIM_CHANNEL_1));//TODO ����ʱ������ü���ʱ��
- update_motor_speed(step, 300u * GetSpeedTimerOutcnt() + timer_counter_read(TIMER2));
- SEGGER_RTT_printf(0, "Speed is:%d!\n", motor_drive.speed);
+ // update_motor_speed(step, __HAL_TIM_GET_COMPARE(htim, TIM_CHANNEL_1)); //TODO ����ʱ������ü���ʱ��
+ update_motor_speed(motor_step, 300u * GetSpeedTimerOutcnt() + timer_counter_read(TIMER2));
+ SEGGER_RTT_printf(0, "Hall state is:%d!\n", motor_step);
motor_drive.timeout = 0;
- exti_interrupt_flag_clear(HALL_A_EXTI | HALL_B_EXTI | HALL_C_EXTI);
+ // // exti_interrupt_flag_clear(HALL_A_EXTI | HALL_B_EXTI | HALL_C_EXTI);
}
+
// if (RESET != exti_interrupt_flag_get(EXTI_4))
// {
// SEGGER_RTT_printf(0, "HALL_A_EXTI triggle!\n");
@@ -242,135 +245,150 @@
}
switch (step)
{
- /* next step: step 2 configuration .A-C` breakover---------------------------- */
+ /* next step: step 3 configuration .W-U` breakover---------------------------- */
case 1:
/* channel U configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_U, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_ENABLE);
- MOTOR_U_L_DISABLE;
+
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_U, 0);
+ MOTOR_U_L_ENABLE;
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCXN_DISABLE);
/* channel V configuration */
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCX_DISABLE);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCX_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_V, 0);
MOTOR_V_L_DISABLE;
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCXN_DISABLE);
/* channel W configuration */
- // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_W, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCX_DISABLE);
- MOTOR_W_L_ENABLE;
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_W, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCX_ENABLE);
+ SetPwmDuty(MOTOR_OUT_CH_W, motor_pluse);
+ MOTOR_W_L_DISABLE;
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCXN_ENABLE);
- step++;
break;
- /* next step: step 3 configuration .B-C` breakover---------------------------- */
+ /* next step: step 6 configuration .u-v` breakover---------------------------- */
case 2:
/* channel U configuration */
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_DISABLE);
- timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCXN_DISABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_U, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_ENABLE);
+ SetPwmDuty(MOTOR_OUT_CH_U, motor_pluse);
+ // timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCXN_DISABLE);
MOTOR_U_L_DISABLE;
/* channel V configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_V, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCX_ENABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_V, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCX_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_V, 0);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCXN_DISABLE);
- MOTOR_V_L_DISABLE;
+ MOTOR_V_L_ENABLE;
/* channel W configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_W, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCX_DISABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_W, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCX_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_W, 0);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCXN_ENABLE);
- MOTOR_W_L_ENABLE;
+ MOTOR_W_L_DISABLE;
- step++;
break;
- /* next step: step 4 configuration .B-A` breakover---------------------------- */
+ /* next step: step 2 configuration .W-V` breakover---------------------------- */
case 3:
/* channel U configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_U, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_DISABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_U, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_U, 0);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCXN_ENABLE);
- MOTOR_U_L_ENABLE;
+ MOTOR_U_L_DISABLE;
/* channel V configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_V, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCX_ENABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_V, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCX_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_V, 0);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCXN_DISABLE);
- MOTOR_V_L_DISABLE;
+ MOTOR_V_L_ENABLE;
/* channel W configuration */
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCX_DISABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_W, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCX_ENABLE);
+ SetPwmDuty(MOTOR_OUT_CH_W, motor_pluse);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCXN_DISABLE);
MOTOR_W_L_DISABLE;
- step++;
break;
- /* next step: step 5 configuration .C-A` breakover---------------------------- */
+ /* next step: step 5 configuration .V-W` breakover---------------------------- */
case 4:
/* channel U configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_U, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_DISABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_U, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_DISABLE);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCXN_ENABLE);
- MOTOR_U_L_ENABLE;
+ SetPwmDuty(MOTOR_OUT_CH_U, 0);
+ MOTOR_U_L_DISABLE;
/* channel V configuration */
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCX_DISABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_V, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCXN_ENABLE);
+ SetPwmDuty(MOTOR_OUT_CH_V, motor_pluse);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCXN_DISABLE);
MOTOR_V_L_DISABLE;
/* channel W configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_W, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCX_ENABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_W, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCXN_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_W, 0);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCXN_DISABLE);
- MOTOR_W_L_DISABLE;
+ MOTOR_W_L_ENABLE;
- step++;
break;
- /* next step: step 6 configuration .C-B` breakover---------------------------- */
+ /* next step: step 1 configuration .V-U` breakover---------------------------- */
case 5:
/* channel U configuration */
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_DISABLE);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_U, 0);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCXN_DISABLE);
- MOTOR_U_L_DISABLE;
+ MOTOR_U_L_ENABLE;
/* channel V configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_V, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCX_DISABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_V, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCXN_ENABLE);
+ SetPwmDuty(MOTOR_OUT_CH_V, motor_pluse);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCXN_ENABLE);
- MOTOR_V_L_ENABLE;
+ MOTOR_V_L_DISABLE;
/* channel W configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_W, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCX_ENABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_W, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCXN_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_W, 0);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCXN_DISABLE);
MOTOR_W_L_DISABLE;
- step++;
break;
- /* next step: step 1 configuration .A-B` breakover---------------------------- */
+ /* next step: step 4 configuration .U-W` breakover---------------------------- */
case 6:
/* channel U configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_U, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_ENABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_U, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCX_ENABLE);
+ SetPwmDuty(MOTOR_OUT_CH_U, motor_pluse);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_U, TIMER_CCXN_DISABLE);
MOTOR_U_L_DISABLE;
/* channel V configuration */
- timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_V, TIMER_OC_MODE_PWM1);
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCX_DISABLE);
+ // timer_channel_output_mode_config(TIMER0, MOTOR_OUT_CH_V, TIMER_OC_MODE_PWM0);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCX_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_V, 0);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_V, TIMER_CCXN_ENABLE);
- MOTOR_V_L_ENABLE;
+ MOTOR_V_L_DISABLE;
/* channel W configuration */
- timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCX_DISABLE);
+ // timer_channel_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCX_DISABLE);
+ SetPwmDuty(MOTOR_OUT_CH_W, 0);
// timer_channel_complementary_output_state_config(TIMER0, MOTOR_OUT_CH_W, TIMER_CCXN_DISABLE);
- MOTOR_W_L_DISABLE;
+ MOTOR_W_L_ENABLE;
- step = 1;
break;
}
}
@@ -383,11 +401,14 @@
extern void stop_pwm_output(void)
{
timer_channel_output_state_config(TIMER0, TIMER_CH_0, TIMER_CCX_DISABLE);
- timer_channel_complementary_output_state_config(TIMER0, TIMER_CH_0, TIMER_CCXN_DISABLE);
+ // timer_channel_complementary_output_state_config(TIMER0, TIMER_CH_0, TIMER_CCXN_DISABLE);
timer_channel_output_state_config(TIMER0, TIMER_CH_1, TIMER_CCX_DISABLE);
- timer_channel_complementary_output_state_config(TIMER0, TIMER_CH_1, TIMER_CCXN_DISABLE);
+ // timer_channel_complementary_output_state_config(TIMER0, TIMER_CH_1, TIMER_CCXN_DISABLE);
timer_channel_output_state_config(TIMER0, TIMER_CH_2, TIMER_CCX_DISABLE);
- timer_channel_complementary_output_state_config(TIMER0, TIMER_CH_2, TIMER_CCXN_DISABLE);
+ // timer_channel_complementary_output_state_config(TIMER0, TIMER_CH_2, TIMER_CCXN_DISABLE);
+ MOTOR_W_L_DISABLE;
+ MOTOR_V_L_DISABLE;
+ MOTOR_U_L_DISABLE;
}
/**
@@ -399,7 +420,10 @@
{
/* ���ö�ʱ��ͨ����� PWM ��ռ�ձ� */
motor_pluse = pulse;
- //SetPwmDuty();
+ // SetPwmDuty(TIMER_CH_0, motor_pluse);
+ // SetPwmDuty(TIMER_CH_1, motor_pluse);
+ // SetPwmDuty(TIMER_CH_2, motor_pluse);
+
if (motor_drive.enable_flag)
{
motor_phasechange();
--
Gitblit v1.8.0