#ifndef APP_INC_GPIO_H
#define APP_INC_GPIO_H

/*
 * 开关输入
 */
#define SW_IN_PORT GPIOF
#define SW_IN_PIN GPIO_PIN_0
/**
 * @brief SDH2136使能引脚定义
 * 高电平有效
 */
#define SDH2136EN_PORT (GPIOB)
#define SDH2136EN_PIN (GPIO_PIN_3)

#define SDH2136_FAULT_PORT GPIOB
#define SDH2136_FAULT_PIN GPIO_PIN_5

#define HALL_SENSOR_A_PORT GPIOD
#define HALL_SENSOR_A_PIN GPIO_PIN_0
#define HALL_SENSOR_B_PORT GPIOD
#define HALL_SENSOR_B_PIN GPIO_PIN_2
#define HALL_SENSOR_C_PORT GPIOD
#define HALL_SENSOR_C_PIN GPIO_PIN_3

//定义ADC引脚
#define CURRENT_AI_PORT GPIOB
#define CURRENT_AI_PIN GPIO_PIN_4
#define VOLTAGE_AI_PORT GPIOF
#define VOLTAGE_AI_PIN GPIO_PIN_4

//定义串口引脚
#define UART_TX_PORT GPIOD
#define UART_RX_PORT GPIOD
#define UART_TX_PIN GPIO_PIN_5
#define UART_RX_PIN GPIO_PIN_6

//定义PWM通道引脚
//TIME1 CH0
#define PWM_HIN1_PORT GPIOC
#define PWM_HIN1_PIN GPIO_PIN_1
//TIME1 CH1
#define PWM_HIN2_PORT GPIOC
#define PWM_HIN2_PIN GPIO_PIN_2
//TIME1 CH2
#define PWM_HIN3_PORT GPIOC
#define PWM_HIN3_PIN GPIO_PIN_3

//TIME1 CH0_N
#define PWM_LIN1_PORT GPIOB
#define PWM_LIN1_PIN GPIO_PIN_0
//TIME1 CH1_N
#define PWM_LIN2_PORT GPIOB
#define PWM_LIN2_PIN GPIO_PIN_1
//TIME1 CH2_N
#define PWM_LIN3_PORT GPIOB
#define PWM_LIN3_PIN GPIO_PIN_2

extern void GPIO_Config(void);
extern void GPIO_SetSDH2136Disbale(void);
extern void GPIO_SetSDH2136Enbale(void);
#endif